Spartan AR550 Body Armor and Legion Gen 2 Plate Carrier Package
Includes:
- Sentinel Legion Gen 2 Plate Carrier x1
- 11"x14" AR550 Steel Plates x2
- AR550 Steel Side Plates x2
(Disclaimer: Gunmetal Grey is Gen 1, MagLocks NOT featured)
- Brand
- Spartan Armor Systems
- SKU:
- SAS-AR550PKG-LEGION
SPARTAN ARMOR SYSTEMS® SENTINEL LEGION GEN 2 PLATE CARRIER
Product Overview
The Spartan Armor Systems® Legion Gen 2 Plate Carrier is rugged, reliable, and fully adjustable sizing make it suitable for a wide range of operational needs and body types. With its innovative features like the hot-swappable placard system and Rare Earth MagLocks, this carrier allows for rapid mission-specific customization. Designed to hold our 10x12" or 11”x14” body armor plates, the Legion Gen 2 can also accommodate 6”x6” or 6”x8” side plates for additional protection and features a completely removable cummerbund.
Developed For You
The Sentinel Legion Gen 2 weighs in at approximately 3lbs. 9oz., will hold our Steel Core AR500 Omega and AR550 body armor plates, while also offering the option to add in 6"x6" or 6"x8" side plates. If you don't want to run the Sentinel Legion Gen 2 with the cummerbund - no sweat! The cummerbund is easily removable so you can run your plate carrier with just the front and back plates or the full set-up with side plates.
Comfort And Convenience
The Spartan Armor Systems® Legion Gen 2 Plate Carrier includes features designed for customization, modularity, and comfort while affording supreme protection in the field. Anti-slip shoulder padding with Velcro, side release buckles on the waist strap, and elevated mesh for breathability make this one big, bad, carrier.
Sentinel Legion Gen 2 Plate Carrier Specs:
- Durable Emergency Drag Handle
- Anti-slip Shoulder Padding with Velcro
- Side Release Buckles on the Internal Waist Strap
- Elevated Mesh Allowing for Extreme Breathability
- Holds 10x12" or 11"X14" Front and Back Plates
- Removable Cummerbund with Side Plate Pockets For 6"X6" And 6"X8" Armor
- Velcro In Front of the Carrier Is 8"x4" With A Velcro Loop on Each Side
- Velcro On the Back of the Carrier Measures 9x3
- Stronger Carrier Material That Can Withstand Extensive Wear and Tear Over a Long Period of Time
- 1000 Denier
- Bottom Loading
- Weighs Approximately 3lbs. 9oz.
NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates.
SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SET OF TWO
Product Overview
Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties.
Protective Value Added
We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.
Battle Hardened
Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Blazing The Trail of Innovation
Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Configuration: This armor comes as a pair, meaning you will receive both front and back plates.
Shooters Cut Plate Weight (per plate):.
- 11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs
Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness
Side Plate Weight (per plate):
6×6 approximately 2lbs 9oz (base coat) or 2lbs 11oz (full coat)
6×8 approximately 3lbs 6 oz (base coat) or 3lbs 12oz (full coat)
AR550 Body Armor - Shooters Cut Specs:
- Made in U.S.A.
- Special Threat Tested to Level III+ Standards
- Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection
- Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™
- Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See a Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
Videos Hide Videos Show Videos
-
Spartan™ Omega™ AR500 and Spartan AR550 Steel Core Body Armor by Spartan Armor Systems®
Not all steel core body armor is created equal. Our high quali...
-
Body Armor Overview and NIJ Protection Levels - Spartan Armor Systems® Body Armor 101
In this Body Armor 101 segment we cover NIJ protection levels ...
-